The Icom IC-2300H 2 meter FM mobile features a rugged design and an easy-to-read alphanumeric display. The large informative LCD may be set to green, yellow or amber. The receiver covers 136-174 MHz and the transmitter delivers 65, 25, 10 or 5 watts of output. The improved receive IMD helps provide protection from excessively strong signals such as pager signals. And the squelch attenuator (approx 10 dB) allows you to reduce interference from strong nearby signals. A winning combination for receive performance. The front panel has an oversized tuning dial is easy to grab while on the move and the large 4-level backlit display clearly provides key information at a glance. Memory channels can be assigned names for easy recognition and easy access. The IC-2300H supports three different scan modes:  Full Scan, Memory Scan, Programmed Scan and four scan resume conditions.

Other features include:  207 memories, alphanumeric notes, 3-way priority watch and independently programmable Rx/Tx and tone squelch. There is an external speaker jack on the rear panel. The IC-2300H is built rugged and has a convenient front mounted mic jack. The supplied HM-133V remote control mic controls everything in the palm of your hand. Icom's exclusive Hot Keys lets you program the features that you use the most. The bigger backlit keys allow you to operate in low light conditions. Requires 13.8 VDC at 11 amps. A mobile mounting bracket, OPC-1132 power cord and mic hanger are also supplied. Size:  5.51 x 1.6 x 6.4 inches 2.43 lbs. (140x40x162mm 1.1 kg).

Other features:
• Power supply voltage display
• 4.5W (typical) loud audio
• Reduced depth dimensions
• DTMF autodial
• Time-out timer
• Repeater lockout
• Automatic power off
• S-meter squelch
• Wide/narrow channel setting
• Volume up/down function added to the remote control microphone, HM-133V
• Weather channel receive and weather alert function (USA version only)
• Automatic repeater function (USA version only)
• Selectable squelch delay from short and long
• Squelch attenuator reduces suppression from string signals
• PC to transceiver cloning and transceiver to transceiver cloning capability

Icom IC-2300H Specifications:

General:
• Frequency Coverage [USA version]:
  - Rx: 136-174 MHz
  - Tx: 144-148 MHz
• Mode: FM, FM-N
• Number of Memory Channels: 207 (inc. 6 pairs of scan edges and 1 call channel)
• Usable Temperature Range: +14°F to +140°F, -10°C to +60°C;
• Frequency Resolution: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
• Frequency Stability: ±3 ppm (-10°C to +60°C)
• Power Supply Requirement: 13.8 VDC ±15% (negative ground)
• Current Drain - Transmit: 11.0 A (65 Watts)
• Current Drain - Receive: 1.5 A (max. audio output) 0.4 A (standby)
• Antenna Connector: SO-239 (50 ohm)
• Dimensions (projections not included): 5.51(W) x 1.6(H) x 6.4 (D) inches (140 x 40 x 162 mm)
• Weight: 2.43 lbs. (1.1 kg)

Transmitter:
• Output Power: 65 watt, 25 watt, 10 watt, 5 watt selectable
• Modulation System: Variable reactance frequency
• Max. Frequency Deviation: ± 5.0 kHz / ± 2.5 kHz
• Spurious Emissions: Less than -60 dBc typical

Receiver:
• Receive System: Double-conversion superheterodyne
• Intermediate Frequencies: 1st 46.35 MHz, 2nd 450 kHz
• Sensitivity: Less than 0.18 µV typical
• Squelch Sensitivity: ? µV at threshold
• Selectivity (wide/narrow): More than 6 kHz/3 kHz at -6 dB, Less than 14 kHz/9 kHz at -60/-55 dB
• Spurious and Image Rejection: More than 60 dB
• Audio Output Power at 13.8 VDC: More than 40.5 W at 10% distortion with a 4 ohm load.
• External Speaker Connector: 2-conductor 3.5 mm mini jack 8 ohm
• Specifications are subject to change without notice or obligation.